| 1. General technical data |
| Product properties |
| Dimensions | Detailed infomation can be found in chapter"5.Dimensions"on page 6. |
| Material |
| Seal | NBR,FKM,EPDM |
| Body | Brass acc.to DINEN50930-6
Stainless steel 1.4408
Gunmetal(extemal thread)DN 10..DN 20 |
| Coil | Polyamide,epoxy (insulation classH) |
| lnner part of valve | Brass body:Brass,stainless steel and PPS
Stainless steel body:Stainless steel and PPS
Gunmetal body:Stainless steel and PPS(external threadDN 10...DN 20 |
| Orifice | Standard:DN 10..DN40
HP00:DN 13….DN20 |
| Circuit function | Detailed infomation can be found in chapter"2.Circuit functions"on page 4. |
| Performance data |
| Duty cycle | 100%continuous rating;KD coil max.rating 6 circuit switches/minute |
| Switching timelAC/DC |
| DN 10..DN 13 | Opening:10.….100 ms
Ciosing:100...200 ms
Opening:200...300 ms
Ciosing:400...700 ms
Opening:30400 ms
Closing:800...1400 ms |
| DN 20 |
| DN 25..DN 40 |
|
| Electrical data |
| Operating voltage | Standard:024/DC,024/50,230/50,110/50,120/60
HP00:024/DC,24V(50..60 Hz),230V(50...60 Hz) |
| Power consumption | Depending on orifice and coil size
For detailed infomation,see "6.Performance specifications"on page 11 |
| Voltage toleranoe | ±10% |
| Medium data |
| Operating medium |
| NBR | Neutral fluids,water,hydraulic oil,oil without additives |
| FKM | Per-solutions,hot oils with additives |
| EPDM | Oil and fat-free fluids and gases |
| Medium temperature |
| NBR | -10C….+80℃ |
| FKM | 0℃…+90Cwith polyamide coil
0℃.…+120℃with epoxy coil |
| EPDM | -30°C…+90℃ with polyamide coil |
| -30°C….+100℃ withepoxy coil |
EPDM with dninking water approval
according to UBA | Application range of cold and hot water up to+60°℃ |
| Viscosity | Max.21mm²/s |
| Process/Port connection &communication |
| Bectrical connection | Tag connector acc.to DINEN175301-803 fom A
(see"8.4.Ordering chartaccessories"on page 29 |
| Approvals and certificates |
| Degree of protection | IP65IP65 with cable plug Type 2518▶
4XNEMA with stainless steel version and cableplug Type 2509▶ |
| Environment and installation |
| Installation | As required,preferably with actuator upright |
| Ambient temperature | Max.+55℃ |
| .)Measrement at 6 bar and+20°℃at the wade oufet,openg pessre buid-up0...90%,dosing pressue educion 10...10% |
